Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system

D. Carr, Y. Oshida, Jeffrey Platt, C. J. Andres, M. T. Barco, S. Hovijtra

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Provisional cements are used to facilitate retrievability of cement-retained fixed implant restorations. While the relative retentiveness of various provisional and permanent cements has been investigated, the functional life span of these cements is not well documendted. The purpose of this study was to assess the effects of pre-fatigued damage on remaining cement bond strengths. Twelve Brånemark fixtures were embedded in epoxy resin blocks. Cera-One closed-end gold cylinders were cemented with three types of luting cements including ImProv, UltraTemp, and Temp-Bond. Each couples was subjected to cyclic loading at 110 N and a frequency of 80 cycles/rain for 50,000 and 300,000 cycles. Then each cylinder was pulled from the abutment, and the force required to remove the gold cylinder was recorded It was found that ImProv was the most retentive before and after the two cycles, and Temp-Bond was the least retentive. UltraTemp had the highest percentage (27.2 %) of retentive value lost after the second cycle; ImProv was second with 20.8% lost. Temp-Bond had no significant. It was suggested that Temp-Bond luting agent would be the material of choice for provisional cementation, because it allows easier removal of the prosthesis and maintains enough retention to prevent loosening of the restoration.

Original languageEnglish (US)
Title of host publicationMedical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003
EditorsS. Shrivastava
Pages463-466
Number of pages4
StatePublished - 2003
EventMedical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003 - Anaheim, CA., United States
Duration: Sep 8 2003Sep 10 2003

Other

OtherMedical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003
CountryUnited States
CityAnaheim, CA.
Period9/8/039/10/03

Fingerprint

Bond strength (materials)
Fatigue damage
Cements
Restoration
Gold
Epoxy resins
Rain

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Carr, D., Oshida, Y., Platt, J., Andres, C. J., Barco, M. T., & Hovijtra, S. (2003). Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system. In S. Shrivastava (Ed.), Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003 (pp. 463-466)

Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system. / Carr, D.; Oshida, Y.; Platt, Jeffrey; Andres, C. J.; Barco, M. T.; Hovijtra, S.

Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003. ed. / S. Shrivastava. 2003. p. 463-466.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carr, D, Oshida, Y, Platt, J, Andres, CJ, Barco, MT & Hovijtra, S 2003, Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system. in S Shrivastava (ed.), Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003. pp. 463-466, Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003, Anaheim, CA., United States, 9/8/03.
Carr D, Oshida Y, Platt J, Andres CJ, Barco MT, Hovijtra S. Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system. In Shrivastava S, editor, Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003. 2003. p. 463-466
Carr, D. ; Oshida, Y. ; Platt, Jeffrey ; Andres, C. J. ; Barco, M. T. ; Hovijtra, S. / Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system. Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003. editor / S. Shrivastava. 2003. pp. 463-466
@inproceedings{dc20fdd4889348e192bb857987328c37,
title = "Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system",
abstract = "Provisional cements are used to facilitate retrievability of cement-retained fixed implant restorations. While the relative retentiveness of various provisional and permanent cements has been investigated, the functional life span of these cements is not well documendted. The purpose of this study was to assess the effects of pre-fatigued damage on remaining cement bond strengths. Twelve Br{\aa}nemark fixtures were embedded in epoxy resin blocks. Cera-One closed-end gold cylinders were cemented with three types of luting cements including ImProv, UltraTemp, and Temp-Bond. Each couples was subjected to cyclic loading at 110 N and a frequency of 80 cycles/rain for 50,000 and 300,000 cycles. Then each cylinder was pulled from the abutment, and the force required to remove the gold cylinder was recorded It was found that ImProv was the most retentive before and after the two cycles, and Temp-Bond was the least retentive. UltraTemp had the highest percentage (27.2 {\%}) of retentive value lost after the second cycle; ImProv was second with 20.8{\%} lost. Temp-Bond had no significant. It was suggested that Temp-Bond luting agent would be the material of choice for provisional cementation, because it allows easier removal of the prosthesis and maintains enough retention to prevent loosening of the restoration.",
author = "D. Carr and Y. Oshida and Jeffrey Platt and Andres, {C. J.} and Barco, {M. T.} and S. Hovijtra",
year = "2003",
language = "English (US)",
isbn = "0871707985",
pages = "463--466",
editor = "S. Shrivastava",
booktitle = "Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003",

}

TY - GEN

T1 - Effects of pre-fatigue damage on remaining cement bond strength in a cement-retained cera-one implant system

AU - Carr, D.

AU - Oshida, Y.

AU - Platt, Jeffrey

AU - Andres, C. J.

AU - Barco, M. T.

AU - Hovijtra, S.

PY - 2003

Y1 - 2003

N2 - Provisional cements are used to facilitate retrievability of cement-retained fixed implant restorations. While the relative retentiveness of various provisional and permanent cements has been investigated, the functional life span of these cements is not well documendted. The purpose of this study was to assess the effects of pre-fatigued damage on remaining cement bond strengths. Twelve Brånemark fixtures were embedded in epoxy resin blocks. Cera-One closed-end gold cylinders were cemented with three types of luting cements including ImProv, UltraTemp, and Temp-Bond. Each couples was subjected to cyclic loading at 110 N and a frequency of 80 cycles/rain for 50,000 and 300,000 cycles. Then each cylinder was pulled from the abutment, and the force required to remove the gold cylinder was recorded It was found that ImProv was the most retentive before and after the two cycles, and Temp-Bond was the least retentive. UltraTemp had the highest percentage (27.2 %) of retentive value lost after the second cycle; ImProv was second with 20.8% lost. Temp-Bond had no significant. It was suggested that Temp-Bond luting agent would be the material of choice for provisional cementation, because it allows easier removal of the prosthesis and maintains enough retention to prevent loosening of the restoration.

AB - Provisional cements are used to facilitate retrievability of cement-retained fixed implant restorations. While the relative retentiveness of various provisional and permanent cements has been investigated, the functional life span of these cements is not well documendted. The purpose of this study was to assess the effects of pre-fatigued damage on remaining cement bond strengths. Twelve Brånemark fixtures were embedded in epoxy resin blocks. Cera-One closed-end gold cylinders were cemented with three types of luting cements including ImProv, UltraTemp, and Temp-Bond. Each couples was subjected to cyclic loading at 110 N and a frequency of 80 cycles/rain for 50,000 and 300,000 cycles. Then each cylinder was pulled from the abutment, and the force required to remove the gold cylinder was recorded It was found that ImProv was the most retentive before and after the two cycles, and Temp-Bond was the least retentive. UltraTemp had the highest percentage (27.2 %) of retentive value lost after the second cycle; ImProv was second with 20.8% lost. Temp-Bond had no significant. It was suggested that Temp-Bond luting agent would be the material of choice for provisional cementation, because it allows easier removal of the prosthesis and maintains enough retention to prevent loosening of the restoration.

UR - http://www.scopus.com/inward/record.url?scp=2642521326&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2642521326&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:2642521326

SN - 0871707985

SP - 463

EP - 466

BT - Medical Device Materials - Proceedings of the Materials and Processes for Medical Devices Conference 2003

A2 - Shrivastava, S.

ER -