Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration

T.M. Gabriel Chu, Peter Sargent, Stuart J. Warden, Charles H. Turner, Rena L. Stewart

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Large segmental defects in bones can result from tumor removal, massive trauma, congenital malformation, or non-union fractures. Such defects often are difficult to manage and require multiple-phase surgery to achieve adequate union and function. In this study, we propose a novel design of bone morphogenetic protein 2 (BMP-2) carrier for tissue engineering of segmental defect regeneration. The tube-shaped BMP-2 carrier was fabrication from a poly(propylene fumarate)/tricalcium phosphate (PPFITCP) composite via casting technique developed in our laboratory. An in vitro evaluation showed that the compressive strength of the carrier decreased about 48% in 12 weeks while maintained a pH in the 6.8-7.4 range. In vivo study was conducted by implanting carriers loaded with 10 tg of BMP-2 in 5 mm rat femur gap model for 15 weeks. X-ray evidence of bridging was first found in the BMP group at 3 weeks. Bridging in all animals (N=4) in the BMP group was found at 9 weeks. No x-ray evidence of bridging was found in the No BMP group (N=3). pQCT analysis indicated that the bone mineral density of the callus in the BMP group has reached the level of native femur at 15 weeks after implantation, while the callus in the No BMP group has a bone mineral density at a lower level of 84% to the native femur. Histology analysis shows that a normal fatty bone marrow was restored and mineralized callus formed and bridged the segmental defect.

Original languageEnglish
Title of host publicationTechnical Papers of ISA
Pages42-47
Number of pages6
Volume464
StatePublished - 2006
Event43rd Annual Rocky Mountain Bioengineering Symposium and 43rd International ISA Biomedical Sciences Instrumentation Symposium - Terre Haute, IN, United States
Duration: Apr 7 2006Apr 9 2006

Other

Other43rd Annual Rocky Mountain Bioengineering Symposium and 43rd International ISA Biomedical Sciences Instrumentation Symposium
CountryUnited States
CityTerre Haute, IN
Period4/7/064/9/06

Fingerprint

Bearings (structural)
Bone
Proteins
Defects
Minerals
X rays
Histology
Tissue engineering
Surgery
Compressive strength
Rats
Tumors
Polypropylenes
Casting
Animals
Phosphates
Fabrication

Keywords

  • BMP-2
  • Bone mineral density
  • Poly(propylene) fumarate
  • Rapid prototyping
  • Scaffold
  • Segmental defect

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Computer Science Applications

Cite this

Chu, T. M. G., Sargent, P., Warden, S. J., Turner, C. H., & Stewart, R. L. (2006). Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration. In Technical Papers of ISA (Vol. 464, pp. 42-47)

Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration. / Chu, T.M. Gabriel; Sargent, Peter; Warden, Stuart J.; Turner, Charles H.; Stewart, Rena L.

Technical Papers of ISA. Vol. 464 2006. p. 42-47.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chu, TMG, Sargent, P, Warden, SJ, Turner, CH & Stewart, RL 2006, Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration. in Technical Papers of ISA. vol. 464, pp. 42-47, 43rd Annual Rocky Mountain Bioengineering Symposium and 43rd International ISA Biomedical Sciences Instrumentation Symposium, Terre Haute, IN, United States, 4/7/06.
Chu TMG, Sargent P, Warden SJ, Turner CH, Stewart RL. Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration. In Technical Papers of ISA. Vol. 464. 2006. p. 42-47
Chu, T.M. Gabriel ; Sargent, Peter ; Warden, Stuart J. ; Turner, Charles H. ; Stewart, Rena L. / Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration. Technical Papers of ISA. Vol. 464 2006. pp. 42-47
@inproceedings{ea164cdf90a04f85a3a612af72db154a,
title = "Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration",
abstract = "Large segmental defects in bones can result from tumor removal, massive trauma, congenital malformation, or non-union fractures. Such defects often are difficult to manage and require multiple-phase surgery to achieve adequate union and function. In this study, we propose a novel design of bone morphogenetic protein 2 (BMP-2) carrier for tissue engineering of segmental defect regeneration. The tube-shaped BMP-2 carrier was fabrication from a poly(propylene fumarate)/tricalcium phosphate (PPFITCP) composite via casting technique developed in our laboratory. An in vitro evaluation showed that the compressive strength of the carrier decreased about 48{\%} in 12 weeks while maintained a pH in the 6.8-7.4 range. In vivo study was conducted by implanting carriers loaded with 10 tg of BMP-2 in 5 mm rat femur gap model for 15 weeks. X-ray evidence of bridging was first found in the BMP group at 3 weeks. Bridging in all animals (N=4) in the BMP group was found at 9 weeks. No x-ray evidence of bridging was found in the No BMP group (N=3). pQCT analysis indicated that the bone mineral density of the callus in the BMP group has reached the level of native femur at 15 weeks after implantation, while the callus in the No BMP group has a bone mineral density at a lower level of 84{\%} to the native femur. Histology analysis shows that a normal fatty bone marrow was restored and mineralized callus formed and bridged the segmental defect.",
keywords = "BMP-2, Bone mineral density, Poly(propylene) fumarate, Rapid prototyping, Scaffold, Segmental defect",
author = "Chu, {T.M. Gabriel} and Peter Sargent and Warden, {Stuart J.} and Turner, {Charles H.} and Stewart, {Rena L.}",
year = "2006",
language = "English",
volume = "464",
pages = "42--47",
booktitle = "Technical Papers of ISA",

}

TY - GEN

T1 - Preliminary evaluation of a load-bearing BMP-2 carrier for segmental defect regeneration

AU - Chu, T.M. Gabriel

AU - Sargent, Peter

AU - Warden, Stuart J.

AU - Turner, Charles H.

AU - Stewart, Rena L.

PY - 2006

Y1 - 2006

N2 - Large segmental defects in bones can result from tumor removal, massive trauma, congenital malformation, or non-union fractures. Such defects often are difficult to manage and require multiple-phase surgery to achieve adequate union and function. In this study, we propose a novel design of bone morphogenetic protein 2 (BMP-2) carrier for tissue engineering of segmental defect regeneration. The tube-shaped BMP-2 carrier was fabrication from a poly(propylene fumarate)/tricalcium phosphate (PPFITCP) composite via casting technique developed in our laboratory. An in vitro evaluation showed that the compressive strength of the carrier decreased about 48% in 12 weeks while maintained a pH in the 6.8-7.4 range. In vivo study was conducted by implanting carriers loaded with 10 tg of BMP-2 in 5 mm rat femur gap model for 15 weeks. X-ray evidence of bridging was first found in the BMP group at 3 weeks. Bridging in all animals (N=4) in the BMP group was found at 9 weeks. No x-ray evidence of bridging was found in the No BMP group (N=3). pQCT analysis indicated that the bone mineral density of the callus in the BMP group has reached the level of native femur at 15 weeks after implantation, while the callus in the No BMP group has a bone mineral density at a lower level of 84% to the native femur. Histology analysis shows that a normal fatty bone marrow was restored and mineralized callus formed and bridged the segmental defect.

AB - Large segmental defects in bones can result from tumor removal, massive trauma, congenital malformation, or non-union fractures. Such defects often are difficult to manage and require multiple-phase surgery to achieve adequate union and function. In this study, we propose a novel design of bone morphogenetic protein 2 (BMP-2) carrier for tissue engineering of segmental defect regeneration. The tube-shaped BMP-2 carrier was fabrication from a poly(propylene fumarate)/tricalcium phosphate (PPFITCP) composite via casting technique developed in our laboratory. An in vitro evaluation showed that the compressive strength of the carrier decreased about 48% in 12 weeks while maintained a pH in the 6.8-7.4 range. In vivo study was conducted by implanting carriers loaded with 10 tg of BMP-2 in 5 mm rat femur gap model for 15 weeks. X-ray evidence of bridging was first found in the BMP group at 3 weeks. Bridging in all animals (N=4) in the BMP group was found at 9 weeks. No x-ray evidence of bridging was found in the No BMP group (N=3). pQCT analysis indicated that the bone mineral density of the callus in the BMP group has reached the level of native femur at 15 weeks after implantation, while the callus in the No BMP group has a bone mineral density at a lower level of 84% to the native femur. Histology analysis shows that a normal fatty bone marrow was restored and mineralized callus formed and bridged the segmental defect.

KW - BMP-2

KW - Bone mineral density

KW - Poly(propylene) fumarate

KW - Rapid prototyping

KW - Scaffold

KW - Segmental defect

UR - http://www.scopus.com/inward/record.url?scp=70449102413&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70449102413&partnerID=8YFLogxK

M3 - Conference contribution

VL - 464

SP - 42

EP - 47

BT - Technical Papers of ISA

ER -